Bearing life standard
Release time:
2023-08-17
The number of revolutions or hours that a bearing experiences before pitting occurs under a certain load is called the bearing life.
The number of revolutions or hours that a bearing experiences before pitting occurs under a certain load is called the bearing life.
The life of a rolling bearing is defined in terms of the number of revolutions (or hours of operation at a given speed): a bearing within this life should experience initial fatigue damage (spalling or chipping) on any of its bearing rings or rolling elements. However, whether in the laboratory test or in actual use, can be clearly seen, in the same working conditions of the appearance of the same bearing, the actual life is very different. In addition, there are several different definitions of bearing "life", one of which is the so-called "working life", which indicates that the actual life of a bearing can be achieved before the damage is caused by wear, damage is usually not caused by fatigue, but by wear, corrosion, sealing Damage is usually not caused by fatigue, but by wear, corrosion, seal damage, etc.
In order to determine the criteria for bearing life, the bearing life is linked to reliability.
Due to manufacturing precision, material uniformity differences, even if the same material, the same size of the same batch of bearings, used in the same working conditions, the length of its life is not the same. If the statistical life of 1 unit, the longest relative life of 4 units, the shortest 0.1-0.2 units, the longest and shortest life ratio of 20-40 times. 90% of the bearings do not produce pitting corrosion, the number of revolutions or hours experienced is called the rated life of the bearing.
Latest News
Precautions for the use of deep groove ball bearings
For deep groove ball bearings, the bearing load is too small during operation, which will cause sliding between the ball and the raceway, which will become the cause of scratches. This is especially true for large deep groove ball bearings with heavy ball and cage weights. In many cases, bearings will corrode. There are many reasons for bearing corrosion. The most common factors in our daily life are the following:
2022-03-22
The causes of rolling bearing heat and its elimination methods
Bearing precision is low: choose the specified precision grade bearing. Spindle bending or box hole is not centered: repair the spindle or box.
2023-08-17
Maintenance and care of bearings
Dismantling of bearings is carried out for regular maintenance and bearing replacement. After disassembly, if the bearings continue to be used, or if it is necessary to check the status of the bearings, the disassembly should be carried out with the same care as when they are installed. Be careful not to damage the bearing parts, especially the disassembly of interference fit bearings, which are difficult to operate.
2023-08-17
The number of revolutions or hours that a bearing experiences before pitting occurs under a certain load is called the bearing life.
2023-08-17
The main problems faced by China's bearing industry
According to the National Bureau of Statistics data, in 2011 China bearing manufacturing industry scale (annual sales revenue of more than 20 million yuan) a total of 1,416 enterprises, the annual industrial output value of 193.211 billion yuan, an increase of 27.59%; sales revenue of 191.097 billion yuan, an increase of 30.30%; total profit of 12.523 billion yuan, compared with the previous year's growth of 26.54%. It is expected that by 2015, China's bearing production is expected to exceed 28 billion sets, the main business income is expected to reach 210 billion yuan, becoming the world's largest bearing production and sales base.
2023-08-17
The origin of the development of bearings
An early form of linear motion bearing was a row of wooden rods placed under a row of skids. Modern linear motion bearings use the same principle of operation, except that sometimes balls are used instead of rollers.
2023-08-17
CONTACT US
Tel : +8615563589225
E-mail : ksn@skf-bearings.com
WhatApp : +8619953859028
Add : Building 1, No. 1036, Xizha Highway, Fengxian District, Shanghai
GET A FREE QUOTE
Copyright : Shanghai Kaisen Precision Bearing Co., Ltd. Powerby : 300.cn jinan2 SEO BUSINESS LICENSE